Results: 29 products
Page 1 of 3

ID0x SERIES
Description: Digital automatic control system for oil burners and oil appliances

Features: Digital control system for oil-fired hot air heaters and washers. Extended supply voltage range (110-240V @ 50/60Hz). Reduced overall dimensions and weight. Available also with 12VDC and 24VDC supply voltage.
PEG01 - PEG02 Series
Description: Digital automatic system for portable hot air generators, high-pressure cleaners and similar oil-burning appliances.

Features: Digital device with electrical reset with static light filter based on irregular flame pulse reading.
TEMPERATURE DIGITAL CONTROL SYSTEM SERIES 1966
Description: Microcontroller-based electronic board for burner ignition, control and thermoregolation in atmospheric or condensing premix boilers

Features: These electronic systems are suitable for operating cycle and temperature control in closed-chamber and open-chamber gas boilers, fitted with atmospheric or premixed gas burner.
Digital temperature adjustment system type 384
Description: Integrated digital temperature adjustment systems

Features: Driving classic atmospheric boiler loads with remote ignitor. Reading 3 ntc probes, standard controls and timer. User interface with two 7-seg display or display lcd and 7 switchs. Remote control with opentherm protocol (by 386).
SERIES 354
Description: Integrated digital temperature adjustment and safety systems

Features: Driving classic atmosferic boiler loads caldaia with remote ignitor. Reading 3 ntc probes, standard controls and timer. Remote user interface with two 7-seg display or display lcd and 7 switchs.
SERIES 350
Description: Integrated digital temperature adjustment systems

Features: Driving classic atmosferic boiler loads with remote ignitor. Reading 3 ntc probes, standard controls and timer. Interface with two 7-seg display or display lcd and 7 switchs.
Digital temperature adjustment system type MI860
Description: Microcontroller-based electronic board for burner ignition, control and thermoregolation in condensing premix boilers.

Features: Compliance with EN 298:2003 (European standard for automatic gas burner control and flame monitoring systems); compliance with EN 12067-2 gas/air ratio controls for gas burners and gas burning appliances (GARC devices); bi-electrode ignition and flame detection system, polarized or not polarized; 230 VAC 50/60 Hz power supply; multiple ignition attempts; settings and visualizations on a LCD control board; use of (up to) 6 NTC contact and / or immersion probes for temperature measurement; outgoing water temperature adjustment program by means of an outside probe; control of the boiler thermo-regulation and safety parts (modulating circulator, PWM high-efficiency circulator, gas valve, modulating fan, deflecting DHW valve, stepper motor, igniter, pneumatic gas valve, DHW flow-switch / flow-meter, air pressure switch, water pressure devices, thermostats, temperature probes); possibility of reading an external 010 Volt type signal supplied by an external electronic device; room thermostat contact or remote OpenTherm-compatible chrono-thermostat; connection with a remote PC by means of a RS232 cable; connection to a GPRS modem for interfacing with mobile network and communicating (SMS) with remote devices; applications with electronic gas-air mixing (GARC); prearranged for the management of cascade system application (via RS485 communication); prearranged for use in systems with separate zones by means of an option board; prearranged for the management of a solar thermal system by means of an option board.
Digital temperature adjustment system type 864
Description: Microcontroller-based electronic board for burner ignition, control and thermoregulation in condensing premix boilers.

Features: 120 VAC / 60 Hz power supply; multiple ignition attempts; control of the boiler thermo-regulation and safety parts (modulating circulator, gas valve, stepper motor / 3 way DHW valve, flow switch/flow-meter, air pressure switch, safety thermostat, etc.); settings and visualizations on a LCD control board; use of (up to) 6 NTC contact and/or immersion probes for temperature measurement; outgoing water temperature adjustment by means of an outside probe; heating request managed by room thermostat contact or remote OpenTherm-compatible chrono-thermostat; connection with a remote PC by means of a RS232 cable or via GSM (wireless modem); prearranged for use in systems with separate zones; cascade system application; prearranged for the management of a solar thermal system through an optional external board.
SERIES 380
Description: Integrated digital temperature adjustment and safety systems

Features: Driving classic condensing boiler loads with remote ignitor. Reading 6 ntc probes, standard controls and timer. User interface with two 7-seg display or display lcd and 7 switchs.
SERIES 358
Description: Integrated digital temperature adjustment systems

Features: Driving classic pre-mixed boiler loads caldaia with remote ignitor. Reading 3 ntc probes, standard controls and timer. User interface with two 7-seg display or display lcd and 7 switchs.

1   2   3    Next »